Table of Contents

Advertisement

Heating and air conditioning system

Heating

Using the system
The heating system delivers air into the interior of the
vehicle and warms it as required.
Setting temperature
– Turn the control dial
increase the temperature.
– Turn the control dial
temperature.
Using the system
Safety
Fig. 84 Heating:
Controls
A
⇒ fig. 84
to the right in order to
A
A
to the left in order to increase the
A
Driving Tips
Heating and air conditioning system
Controlling blower
A
– Turn the blower switch
B
order to switch the blower on.
A
– Turn the blower switch
B
blower off.
A
– Pressing switch
causes the recirculating air system to be
D
switched on - recirculated air mode ⇒
Control for air distribution
– You can adjust the direction of the inlet air flow ⇒ page 93
using air distribution regulator
The air inlet in front of the windscreen must be free of ice, snow or leaves
in order to ensure that the heating and ventilation systems operate prop-
erly.
All controls apart from the control dial
mediate position.
The heating effect is dependent upon the coolant temperature, thus full
heat output only occurs when the engine has reached its operating
temperature.
The blower should aways be on to prevent the windows from misting up.
WARNING
You should not leave recirculated air mode on over a longer period
of time. "Stale air" may result in fatigue in the driver and passen-
gers, reduce attention levels and also cause the windows to mist
General Maintenance
Breakdown assistance
into one of the positions, 1 to 4, in
into position 0 in order to switch the
.
A
.
C
A
can be set to any desired inter-
B
Technical Data
91

Advertisement

Table of Contents
loading

Table of Contents