Table of Contents
Advertisement
Power windows*
Switch
The power windows operate only when ignition is switched on.
Opening a window
– A window is opened by pressing lightly on the respective
switch in the door. The process stops when one releases the
switch.
– Pressing of the switch in the driver's door down to the stop will
cause the window to be opened completey, automatically.
Renewed pressing of the switch causes the window to stop
immediately.
Using the system
Safety
Closing a window
– A window is closed through pulling lightly on the respective
– Pulling of the switch in the driver's door to the stop will cause
The switch for the individual windows is located in the armrest of the
driver's door
Switch for the power window in the armrest of the driver's door
A
A
A
B
A
C
Fig. 29 Switch on the
driver's door
A
D
A
S
Safety pushbutton*
You can deactivate the switches for power windows at rear doors by
pressing the safety pushbutton
windows at rear doors are activated again by pressing the safety push-
button
•
in the vehicle since it is no longer possible to open the windows
from the inside in an emergency.
•
be stop if an obstruction is detected and the window will open
Driving Tips
General Maintenance
switch in the door. The closing process stops when one
releases the switch.
the window to be closed completey, automatically. Renewed
pulling of the switch causes the window to stop immediately.
⇒ fig.
29, front passenger door and in the rear doors*.
Switch for the power window in the driver's door
Switch for the power window in the front passenger's door
Switch for the power window in the rear door on the right*
Switch for the power window in the rear door on the left*
Safety pushbutton*
A
⇒ fig.
S
A
again.
S
WARNING
If you lock the vehicle from the outside, do not leave any person
The system is fitted with a force limiter. The closing process will
Breakdown assistance
Unlocking and locking
29. The switches for power
Technical Data
49
Advertisement
Table of Contents
