Advertisement
how to
clean
device
24
your
1
After removing your Nano CIC from your ear, take the
ear dome out of the device.
Gently use brush or an alcohol wipe to remove the ear
2
wax on your device, especially on the area covered by
the dome.
3
If necessary, change the waxguard(s). (Check page 22)
Clean the ear dome verifying there is no wax buildup or
debris covering its hole, you can clean it with warm water
4
and soft soap and gently massage the dome until it's
free of wax - always remove the domes from the device.
Clean with a dry wipe and let the device dry. Install the
5
eardome.
Advertisement
