If The Burner Does Not Light; If The Flame Is Irregular; General Guidelines - Currys Essentials CFSG60W17 Instruction Manual

Free standing gas cooker

Table of Contents

If the Burner Does Not Light

If the burner does not light, check that:

• The cooker is switched on.

• The gas is turned on.

• You have held the control in for at least ten seconds.

• The ignitors are sparking. If the ignitors are not sparking, they may be dirty or wet. Clean them gently with a

small nylon brush such as a toothbrush as shown below.

If the flame is yellow or irregular, check that the burner parts, including the burner cap, are:

• Clean and dry.

• Positioned correctly. Allow to cool, then refer to the "Replacing the Burners" section.

To get the best out of your hob, follow these simple suggestions:

• Use saucepans with thick flat bottoms. Food in a saucepan with an uneven bottom will take longer to cook.

• Do not let large saucepans or frying pans overlap the edges of your hob as this can deflect heat onto your

worktop and damage the surface.

• Always make sure saucepans are stable. Using very heavy saucepans may bend the trivet/pan support or deflect

the flame.

• Always lift the cookware when removing from the hob, do not drag.

• When you need to boil, simmer or fry food, first set the temperature to the high position. Once the food is

boiling, reduce the temperature to maintain a steady flow of heat to cook your food thoroughly. Doing this will

reduce the cooking time.

* All images are for indication only; please refer to your individual unit for actual item.

Currys Essentials Free Standing GAS Cooker CFSG60W17 Manual.indd 19

Ignitor

Flame failure

probe

20/01/2021 17:42

Table of Contents