Table of Contents
Advertisement
Adjusting the Feet
Using the fitted adjustable feet is MANDATORY. For safety reasons and to ensure adequate ventilation,
the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
The cooker stands on 4 levelling legs. Your cooker is set at its
lowest level when shipped, it is required that the product is
levelled before operating it. This adjustment can be made
by turning the levelling leg clockwise to raise the cooker, if
required. It is possible to raise the product a maximum of
30mm via the levelling leg. The product must NOT be moved
by dragging. The cooker must always be moved by lifting it
up. The levelling leg can be adjusted by hand or by using the
Stability bracket as a tool.
Level the cooker by screwing the bottom of the feet in or out,
as shown.
Moving the Cooker
• Two people must always raise the cooker, as shown, to
prevent damaging the adjustable feet.
• Do not lift the cooker by the door handles.
• DO NOT DRAG the cooker. Lift the feet clear of the floor.
* All images are for indication only; please refer to your individual unit for actual item.
10
Currys Essentials Free Standing GAS Cooker CFSG60W17 Manual.indd 10
Currys Essentials Free Standing GAS Cooker CFSG60W17 Manual.indd 10
The Stability bracket can be used as a tool to
adjust the levelling legs.
20/01/2021 17:42
20/01/2021 17:42
Advertisement
Table of Contents
