Table of Contents
Advertisement
WHOLE-HOME CLEANING
CLEANING MODES
UPRIGHT
To engage brushroll, select Carpet mode,
then step on floor nozzle and tilt handle
back.
ABOVE-FLOOR-WAND
With pod removed, press the Wand Release
button to detach the wand from the pod.
Attach an accessory to the end of the wand.
NOTE: All accessories are compatible with both the wand and the handle.
s h a r kc l e a n . c o m
LIFT-AWAY®
Press the red Release Button on the side of
the pod. Step on the floor nozzle and lift off
the pod.
ABOVE FLOOR-HANDLE
With pod removed, press the Handle Release
button to detach the handle from the wand.
Attach an accessory to the end of the handle.
EMPTYING THE DUST CUP
IMPORTANT: Unplug the power cord before performing any maintenance.
Empty the dust cup each time you vacuum and periodically during cleaning,
when debris in the dust cup reaches the MAX fill line.
Undo the Latches on the sides of the dust
cup by lifting them up and out. Tilt the dust
cup and lift it off vacuum pod.
To remove collected debris from Lint Screen,
press the top release button and lift the handle
to open. Gently brush lint screen to clean.
To empty debris into trash, press the lower
release button and the bottom lid will drop open.
To reinstall, set the bottom of the dust cup
and tilt until dust cup clicks into place.
s h a r kc l e a n . c o m
Advertisement
Table of Contents
