Shark Navigator LIFT-AWAY PRO Quick Start Manual

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
QUICK START GUIDE
WHAT'S INSIDE
A
Handle with Stretch Hose
B Floor Nozzle
C Extension Wand
D Accessory Holder
E Portable Lift-Away® Canister
ASSEMBLY
1
(Click)
B
Insert canister into
motorized floor nozzle.
A
3
(Click)
D
4
(Click)
Connect handle to the wand,
pressing until it clicks into place.
Connect hose to the back of the
canister pressing until it clicks
into place.
NV355_QSG_REV_Mv3
LIFT-AWAY ® PRO
F 8" Crevice Tool
G Dusting Brush
H Wide Upholstery tool
C
2
(Click)
E
Insert wand into the
canister.
F G
H
MAINTENANCE
Empty dust cup after each use
Pull up on Hold Dust Cup over
Dust Cup a trash bin and press
Release latch the empty-release
and lift dust cup latch on the bottom.
off canister.
Cleaning Filters
Pre-Motor
Post-Motor
Pre-Motor (foam and felt):
With the dust cup removed, take out and rinse the
foam and felt filters with water only.
Post-Motor (HEPA):
To access the HEPA filter, reach under the grill and pull
the Filter Access latch to remove the grill. Remove and
rinse the HEPA filter with water only. Let all filters air-dry
completely before reinstalling.
Easy brushroll maintenance
Detach the motorized
nozzle from the portable
Lift-Away canister.
Press top
Dust Cup Release
latch to access
dust screen and
remove built-up
debris as required.
TIP:
Wash filters every
3 months to keep
the suction strong.
Rinse filters and allow
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Remove any string,
carpet fibers, or hair
that may be wrapped
around the brushroll.