Additional Resources - Dell EMC VxFlex Ready Node Operating System Installation Manual

Reference material
Results
The script attempts to configure several boot order commands, regardless of the hardware configuration of the VxFlex
Ready Node server. This allows the script to support multiple hardware platform configurations.
Therefore, it is normal to see these error messages within the logs:
Firmware updates may also display and log the following message:
This update is not compatible with your system configuration.
These firmware are included on the ISO in order to support various VxFlex Ready Node platforms. The log messages do
not necessarily indicate a failure.

Additional resources

This section contains information regarding additional resources that may be helpful useful when using the Hardware
ISO.
VxFlex OS resources
VxFlex Ready Node deployments have specific guidelines regarding server installation, rack and stack procedures, and
power and networking requirements.
The VxFlex Ready Node Hardware Installation Guide describes how to install the physical components of a VxFlex Ready
Node system. For additional information regarding the VxFlex Ready Node product, documentation, advisories,
downloads, and white papers, visit https://support.emc.com/products/42216.
Dell Lifecycle Controller (LC)
At the heart of the VxFlex Ready Node servers' embedded management is the iDRAC with Lifecycle Controller (LC)
technology.
This technology allows users to perform useful tasks such as configuring BIOS and hardware settings, deploying
operating systems, updating drivers, changing RAID settings, and saving hardware profiles. Together, they provide a
robust set of management functions that can be leveraged throughout the entire server lifecycle.
VxFlex Ready Node Operating System Installation Guide for Linux
82