Ericsson MINI-LINK TN R3 ETSI Technical Description page 97

Figure 80
4.7.1 RTPC Mode
In RTPC mode the transmit power (P
a maximum level (P
4.7.2 ATPC Mode
ATPC is used to automatically adjust the transmit power (P
maintain the received input level at the far-end terminal at a target value. The
received input level is compared with the target value, a deviation is calculated
and sent to the near-end terminal to be used as input for possible adjustment
of the transmit power. ATPC varies the transmit power, between a selected
maximum level (P
4/1555-CSH 109 32/1-V1 Uen B 2007-09-14
Transmit power
P
max
P
fix min
P
ATPC min
Transmit power control
). The desired value (P
max
) and a hardware specific minimum level (P
ATPC max
P
ATPC max
P P
set out
RTPC mode ATPC mode
) ranges from a minimum level (P
out
) can be set in 1 dB increments.
set
Radio Terminals
P
out
5647
) to
fix min
) in order to
out
).
ATPC min
91