Ericsson MINI-LINK TN R3 ETSI Technical Description page 49

Note that the TDM bus can carry close to 400 uni-directional E1s in AMM 20p
and AMM 6p, half of this in AMM 2p, but some of the capacity is allocated for
DCN and control information. To facilitate future software functional upgrades it
is not recommended to route traffic on more than 366 uni-directional E1s over
the AMM 6p and AMM 20p TDB bus, half of this in AMM 2p.
The traffic routing function is controlled from the EEM, locally or remotely.
Traffic configuration can also be done using the SNMP interface.
3.8.1 MINI-LINK Connexion
The MINI-LINK Connexion application provides a way to provision end-to-end
E1 connections in a network. The network can be planned in advance without
the need for the actual network. When the pre-configured E1 connections are
applied to the real network a consistency check is done.
All operations related to the E1 provisioning are done from a topology map
with a graphical presentation of the E1 connections. Color codes are used to
visualize alarm status. Detailed alarm info and status are obtained by clicking
on a connection on the map.
A number of different reports can be extracted periodically or on demand to
view performance data and statistics related to an E1 end-to-end connection.
For more information, see MINI-LINK Connexion User Manual.
4/1555-CSH 109 32/1-V1 Uen B 2007-09-14
Basic Node
43