Ericsson MINI-LINK TN R3 ETSI Technical Description page 84

MINI-LINK TN R3 ETSI
4.4.3 Mounting Kits
This section describes the mounting kits used for the 0.2 m, 0.3 m and 0.6 m
antennas. A mounting kit consists of two rigid, extruded aluminum brackets
connected with two stainless steel screws along the azimuth axis. The brackets
are anodized and have threaded and unthreaded holes to provide adjustment
of the antenna in azimuth and elevation.
The support can be clamped to poles with a diameter of 50–120 mm or
on L-profiles 40x40x5–80x80x8 mm with two anodized aluminum clamps.
All screws and nuts for connection and adjustment are in stainless steel.
NORD-LOCK washers are used to secure the screws.
Figure 68
The 0.2 m compact antenna mounting kit can be adjusted by ±13° in elevation
and by ±90° in azimuth.
Figure 69
The mounting kit for 0.3 m and 0.6 m compact antenna can be adjusted by
±15° in elevation and ±40° in azimuth. Both elevation and azimuth have a
mechanism for fine adjustment.
78
Mounting kit for the 0.2 m compact antenna
Mounting kit for the 0.3 m and 0.6 m compact antennas
4/1555-CSH 109 32/1-V1 Uen B 2007-09-14
6717
6718