Management Tools And Interfaces - Ericsson MINI-LINK TN R3 ETSI Technical Description

6.8

Management Tools and Interfaces

This section gives a brief overview of the management tools and interfaces
used for MINI-LINK TN R3.
MINI-LINK TN
Site LAN
LCT
Figure 91 Management tools and interfaces
6.8.1 Element Management
The element management function provides tools for on site installation,
configuration management, fault management, performance management
and software upgrade. It is also used to configure the traffic routing function,
protection and DCN.
For local management, a Local Craft Terminal (LCT) is used, that is the NE is
accessed locally by connecting a PC to the NPU or ATU, with a USB cable.
The NE can also be accessed over the site LAN or remotely over the DCN.
A thorough description of the element management functions is available as
online help and in the MINI-LINK TN Operation Manual.
4/1555-CSH 109 32/1-V1 Uen B 2007-09-14
ServiceOn Microwave
SNMP
DCN
MINI-LINK HC
Mobile Network OSS/NMS
SNMP
SNMP
MINI-LINK E
Management
MINI-LINK BAS
7854
119