Download Print this page
Webasto Air Top Series Operating Instructions Manual
Webasto Air Top Series Operating Instructions Manual

Webasto Air Top Series Operating Instructions Manual

Hide thumbs Also See for Air Top Series:

Advertisement

Quick Links

Operating Instructions
Air Top Series Heaters
Introduction
Dear Webasto Customer,
Thank you for choosing a Webasto Air
Top Series Heater. Air Top Series
Heaters are used
to heat cabins, boats, trucks, minibuses, vans and motor-homes and
to defrost vehicle windows.
We presume that the principle and mode of operation of your
new heater has been explained to your complete satisfaction by
the workshop or service center which installed the heater. In
these operating instructions we would like to once again
provide you with an overview of the safe use of your new
heater.
Repair work should only be carried out by an authorized Webasto dealer.
Servicing and Safety Instructions
1. While a Webasto heater is in use, the product surface, connected
hoses, ducting, and air outlet(s) may become hot to the touch. Contact
with skin may cause burns.
2. Webasto heaters must be switched OFF when re-fueling at filling
stations and/or while loading or unloading flammable materials
for transport, to prevent the risk of explosion. Please review the
owner's manual for safety and use instructions.
3. The year in which the heater was used for the first time must be
permanently displayed on the factory plate by deleting the inapplicable
years from the plate.
4. The heaters are not designed for heating hazardous substance
transport compartments.
5. Claims can only be made if it can be verified that the claimant has
complied with the servicing and safety instructions.
6. The heater may not be operated in enclosed spaces (such as
garages) as a result of the risk of poisoning and asphyxiation,
even if a timer is used.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Air Top Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Webasto Air Top Series

  • Page 1 Repair work should only be carried out by an authorized Webasto dealer. Servicing and Safety Instructions 1. While a Webasto heater is in use, the product surface, connected hoses, ducting, and air outlet(s) may become hot to the touch.
  • Page 2 8. The heater must be checked by an expert at the latest at the start of the cold-weather period. 9. NEVER attempt to install or repair a Webasto heating system unless you have successfully completed Webasto factory training and have the technical skills, technical information, tools, and equipment required to properly complete the necessary procedures.
  • Page 3 24. The heater must not be cleaned with a high-pressure cleaner. 25. ALWAYS and carefully follow Webasto installation and repair instructions and heed all WARNINGS.
  • Page 4: Control Element

    In ventilation mode the fan speed depends on the position of the control element knob. SmarTemp Control *aThe micro USB service port is used for Webasto heater diagnostic purposes on the SmarTemp 2.0 only. This port cannot be used to charge electronic devices.
  • Page 5 Heater ON Example (2.0) Press the Webasto button to turn heater on. Set Temperature Output & Heater Runtime Example Using the rotary dial and the selection button, follow these steps to set your cab temperature to 70°F with a runtime of 4 hours.
  • Page 6 2. Highlight the timer feature, press the Selection button. Select “edit” from the sub-menu. 3. Adjust and select day for Friday. 4. Adjust and select time for 6:30AM. 5. Adjust and select runtime for 60 minutes. 6. Settings are saved each time the Select button is pressed. Refer to Menu Descriptions Table for a detailed description of each menu item and its default setting.
  • Page 7 Menu Description Refer to Menu Descriptions Table for a detailed description of each menu item and its default setting. Depending on the SmarTemp version, menu order may vary from order below. Definitions Default Mode changes the operation of the heater between heat mode and ventilation mode.
  • Page 8 Error Code NOTE: Heater error codes cannot be reset through the Webasto SmarTemp Control 3.0; a Webasto PC Diagnostics tool or the SmarTemp app is required. Refer to the heater service manual for resetting an error code.
  • Page 9 12 (AM / PM) or 24 hour available. 12 hour Time & Date The Webasto button can be used to go back to the previous field if additional changes are needed. Depending on the installation location, the temperature reading may vary slightly. The Offset 0°...
  • Page 10 If an error occurs, first check the fuse and plug connections to ensure that they are in proper condition and con- nected correctly. If the actions described below do not rectify the error, have the heater checked by Webasto-trained personnel. Heater unit cuts out automatically Cause...
  • Page 11 Error code output on combination timer or control element If the system is fitted with a combination timer, when an error occurs an error code is displayed on the timer's screen until the heater has been properly repaired. The error code is output if the heater is fitted with a control element after an error has occurred by the switch- on indicator/error code indicator flashing.
  • Page 12 If you have any questions, contact our technical support team at: (800) 860-7866 or via email at: info-us@webasto.com. Product Registration The heater can be registered by visiting www.techwebasto.com or by scanning the...
  • Page 13 (2) years effective at the time of installation or vehicle registration date for original equipment installation (OEM). This warranty period may not exceed three (3) years from the original date of sale by Webasto. This warranty period may be superseded by written contractual agreements.
  • Page 14 Webasto Thermo & Comfort N.A., Inc 15083 North Road Fenton, MI 48430 Technical Assistance Hotline USA: (800) 860-7866 Canada: (800) 667-8900 www.webasto.us www.techwebasto.com Org. 3/2017 Rev: 05/2021 P/N: 5012526D...