Community Playthings Community Loft 1 Starter Product Manual page 25

3
Remove the top connector rings from one
panel and lift it out of the bottom rings.
Do not take all the top rings off at once;
this could cause instability and falling
panels. Continue around removing one
panel at a time.
5
Remove the platforms and stairs. Then
take apart the bottom layer of the loft.
Now you can try another pattern, and give
the room a whole new look!
Model 1 Starter
4
Take the stair railings off by lifting
straight up. Then you can remove the
stairs. A sharp tap on the bottom of the
couplings will loosen them from the rail-
ing for storage.
23