Table of Contents
Advertisement
Any other instrument provided by BT
may be assumed to have a REN of 1
unless stated otherwise.
A total REN of 4 is allowed per telephone
line. (For example: if the BT Diverse 4016
is used in conjunction with three
extension telephones, each with a REN
of 1, then the total REN = 4)
Only use approved power supply item
code
M-GA35-095130F
R&TTE
This product is intended for use within
the UK for connection to the public
telephone network and compatible
switchboards.
This equipment complies with the
essential requirements for the Radio
Equipment and Telecommunications
Terminal Equipment Directive
(1999/5/EC).
Helpline
If you are experiencing difficulty,
please call the BT Diverse Helpline
on 08457 908070.
Switchboard compatibility
Generally this telephone may be connected
to switchboards which support tone
signalling and timed break recall. In the
event of any difficulties please consult
your switchboard Service Provider.
All manuals and user guides at all-guides.com
.
To set the dialling mode
You need only adjust this
setting if your switchboard does
not operate with the pre-set
tone dialling. You can change
the dial mode to pulse dialling.
Press the Menu options button.
Menu
Press the DOWN navigation
button until the display shows
Base Set .
Press the OK options button.
OK
Press the DOWN navigation
button until display shows
Add Features .
Press the OK options button.
OK
Display shows
Press the OK options button.
OK
Press the DOWN navigation
button to select:
– tone (with TBR)
– pulse (with Earth Recall)
– DTMF-Earth (tone with
Earth loop recall)
Press the OK options button
OK
to confirm. The display shows
Saved .
Press the RED PHONE button
until you reach the idle display.
Dial Mode .
67
Advertisement
Table of Contents
