Siemens BT Diverse 4016 Executive User Manual page 70

To set the recall time
You need only adjust this setting
if your switchboard requires a
different recall time to the
pre-set recall time of 100ms .
Press the Menu options button.
Menu
Press the DOWN navigation
button until the display shows
Base Set .
Press the OK options button.
OK
Press the DOWN navigation
button until the display shows
Add Features .
Press the OK options button.
OK
Press the DOWN navigation
button until the display shows
TBR .
Press the OK options button.
OK
Press the DOWN navigation
button to select the flash time
80 , 100 , 120 , 180 , 250 or
300ms .
Press the OK options button to
OK
confirm. The display shows
Saved .
Press the RED PHONE button
until you reach the idle display.
100 MS is the standard setting for
most UK switchboards.
68
All manuals and user guides at all-guides.com
Note
To switch temporarily from
pulse to tone dialling
If you are using pulse dialling
with your switchboard but
need tone dialling to use
certain functions on your
Diverse 4016 you can switch to
tone dialling during the call.
During your call:
Press the Menu options button.
Menu
Press the DOWN navigation
button until the display shows
Temp.Tone .
Press the OK options button.
OK
Tone dialling is now active.
Press the RED PHONE button
until you reach the idle display.
Note
This setting is only for the duration of
the call.