Advertisement
STEP 17 (See Diagram 17)
A.) Attach the Backrest Board (#41) to the Right & Left Vertical Frames (#5 & #6). Secure each
Board with two M8 x 2 ½" Allen Bolts (#101) and Ø 5/8" Washers (#20).
B.) Place the Seat (#42) onto the Right Seat Support (#10). Secure it with two M8 x 2 ½" Allen
Bolts (#101) and Ø 5/8" Washers (#20).
C.) Attach four Arm Pads (#43) to the Right and Left Butterfly (#15 & #14). Secure each Arm Pad
with two M8 x 2 ½" Allen Bolts (#101) and Ø 5/8" Washers (#20).
D.) To maximize the performance of the gym, it is recommended to use light lubricant such as
WD-40 on the four chrome Guide Rods, which the weight plates slide up and down on, to
minimize friction.
28
DIAGRAM 17
Advertisement
