Advertisement
STEP 6 (See Diagram 6)
A.) Securely tighten all Nuts and Bolts previously installed.
B.) Attach the Right Seat Support (#10) to the Right Base Frame (#1). Secure it with one
M10 x 2 ½" Carriage Bolt (#98), Ø ¾" Washer (#21), and M10 Aircraft Nut (#18).
C.) Attach the Right Seat Support (#10) to the Right Vertical Frame (#5). Secure it with
two M10 x 2 ½" Carriage Bolts (#98), one 4 3/8" x 1 ¾" Bracket (#84), two Ø ¾"
Washers (#21), and two M10 Aircraft Nuts (#18).
D.) Attach the Leg Developer (#26) to the bracket on the Right Seat Support. Secure it
with a M10 x 2 7/8" Allen Bolt (#92), two Ø ¾" Washers (#21), and one M10 Aircraft
Nut (#18). Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able
to swivel.
E.) Attach the Butterfly Support Frame (#12) and the Butterfly Pulley Support (#46) to the
Right Vertical Frame. Align the holes and secure them together with two M10 x 2 ½"
Carriage Bolts (#98), Ø ¾" Washers (#21), and M10 Aircraft Nuts (#18).
F.) Attach two Swivel Pulley Brackets (#49) to the Butterfly Pulley Support (#46). Secure
each Bracket with one M12 x 4 3/8" Hex Bolt (#99), two Ø 1" Washers (#22), and one
M12 Aircraft Nut (#19). Do not over tighten the Nut and Bolt. Make sure each Bracket
is able to swivel.
12
Advertisement
