4-4.
Miscellaneous
• The message "Stabilizing Image Controller not run." appears on the Touch panel
Condition
T/C is less than 4% when an F5 operation is
run (initial adjustment).
<Procedure>
Step
Check Item
Is "ATDC Current Level" of "Level
1
History" available from the Tech.
Rep. mode less than 4%?
2
Run an F5 operation again.
Detection Timing
• When memory clear is run.
• "PC Drum" of "Port/Option" counter is
cleared.
• AIDC Sensor Board PWB-G develops a
malfunction.
Result
Run the auxiliary toner replenishing
YES
cycle and then an F5 operation.
—
T-83
Action