Rd Mode - Minolta EP3010 Manual

Touch Panel
Display

RD Mode

Maintenance
Data Save/ Enables transmission of Data Save and Data Load.
Load
Data Save Transmits the command that saves the PPC RAM data to the Center.
Data Load Transmits the command that loads the data sent by Data Save back to
the PPC.
Initial Used to perform the initial transmission from the PPC to the Center to
Transmission check for correct communication when the Data Terminal has been
set up.
Call Comple- Used by the Tech. Rep. to notify the Center that his/her service job for
tion the copier has been completed.
Counter Clear Used to clear the count of the spare counter set by the Center.
<Procedure>
1. Select the spare counter to be cleared.
2. Touch "Call Completion" which transmits a signal to the Center to
[Tech. Rep. Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
clear the count of the specified counter.
S-34

RD Mode]

Setting