37-3.Factory Setting Function Tree; Factory Setting Function Tree; Function; Adjust - Minolta EP3010 Manual

37-3. Factory Setting Function Tree

Factory
Setting
Marketing Area

(1) Function

Touch Panel Display
F2 Drum/Trans
F4 HV Separator
F6 Edit Ref. Adj

Adjust

Function

See "Tech. Rep. Mode."
[Factory setting
Checks the PC Drum Charge Corona and Image Transfer Corona
for output.
NOTE
For factory adjustment only
Checks the Paper Separator Corona for output.
NOTE
For factory adjustment only
Pressing the Start key turns ON and OFF the Image Erase Lamp
to make a checkered pattern on the paper, thereby checking the
lamp for correct operation and adjusting its position.
S-44
Adjust 1/2
A0 Lens Focus
A1 Lens Full Size Position
A2 Mirror Full Size Position
A3 Feed Direction Mag. Ratio
A4 Scan Regist Full Size
A5 Scan Regist Reduction
Adjust 1/2
A6 Book B-Scan Regist
A11 Scan Regist Enlargement
A12 Leading Edge Erase Adjust
A13 Trailing Edge Erase Adjust
F1 Paper Passage
F3 Exp. Lamp
F5 Optimum & AE
F7 Orig. Sensor
Developer
See "Tech. Rep. Mode" for functions other than F2,
F4, and F6.
Function]
Operation
Paper Path Sensors
F2 Drum/Trans
F4 HV Separator
F6 Edit Ref. Adj
F8 ATDC Adjust
FF F8+F5