Table of Contents
Advertisement
56
Lights and Visibility
Lights and Visibility
Lights
Switching lights on and off
Switching on side lights
– Turn the light switch
Switching on the low beam and main beam
– Turn the light switch into position
– Press the main beam lever forward in order to switch on the
⇒ page 59, fig.
main beam
Fig. 35 Dash panel:
Light switch
⇒ fig. 35
into position
.
.
39.
Switching off all lights
– Turn the light switch into position O.
Low beam comes on only if the ignition is switched on. The low beam is
switched off automatically when the engine is started and after switching
the ignition off; only the side lights come on.
On models fitted with right-hand steering* the position of the switches
⇒ fig.
differs from that shown in
35. The symbols which mark the switch
positions are identical, however.
In certain countries, the low beam is on a reduced brightness as well as
the side lights, when the ignition is switched on.
Note
•
An audible warning will sound if you withdraw the ignition key and open
the driver's door when the vehicle lights are still on.
•
The acoustic warning signal is switched off over the door contact when
the driver's door is closed (ignition off). The vehicle can be parked with the
side lights on.
•
We recommend switching off all lights or leaving only the side lights
switched on if you park the vehicle for a lengthy period.
•
The switching on of the described lights should only be undertaken in
accordance with the legal requirements.
Advertisement
Table of Contents
