Table of Contents
Advertisement
20
Instruments and Indicator/Warning Lights
Using the system
A
The rocker switch
and the button
A
the window wiper lever
Selecting the memory
– Repeated short-term pressing of the button
select the various memories.
Selecting the functions
– Press the rocker switch
individual functions of the multi-functional indicator to appear
in the display one after the other.
Setting function to zero
– Select the memory you want.
A
– Press button
for more than 1 second.
B
Fig. 9 Multi-functional
indicator: Controls
A
are located in the grip of
B
⇒ fig.
9.
A
allows one to
B
A
up or down. This will cause the
A
The following readouts of the selected memory will be set to zero by
A
button
:
B
•
Average fuel consumption
•
Distance driven
•
Average speed
•
Driving time
You can only operate the multi-functional indicator when the ignition is
switched on. After the ignition is switched on, the function displayed is the
one which you last selected before switching off the ignition.
The outside temperature indicator will appear with an ice chrystal symbol
when the outside temperature lies between +5°C and -5°C. The symbol
warns the driver of the possible danger of ice on the road.
The outside temperature
The outside temperature appears in the display when the ignition is
switched on.
The correct outside temperature will be indicated with a delay of 5
minutes. If the vehicle is stationary (or driven at a very low speed) the
temperature indicated may be slightly higher than the actual outside
temperature because of heat radiated by the engine.
If the outside temperature is between about +5 °C and -5 °C an ice crystal
symbol appears before the temperature display.
WARNING
Please note that black ice may also be present on the road surface
even at temperatures around +5°C - warning, drive with care!
Advertisement
Table of Contents
