Skoda Superb 2004 Owner's Manual page 69

68 Lights and Visibility
Folding in both exterior mirrors*
– Turn the rotary knob to position
Tilting surface of front passenger exterior mirror*
When the rotary knob is in position
gear is engaged, the surface of the mirror tilts down slightly. This provides
an aid in seeing the kerb of the pavement when parking the car.
If you shift out of reverse gear, or switch over to the driver exterior mirror
in position  , the mirror surface on the passenger side moves back into the
original position.
Memory for exterior mirrors*
On vehicles fitted with a memory for the driver seat, the relevant setting of
the exterior mirror is also stored automatically when the seat position is
stored ⇒ page 71.
WARNING
Convex (curved outward) or aspherical exterior mirrors increase
the vision field. They do, however, make objects appear smaller in
the mirror. These mirrors are only of limited use, therefore, for esti-
mating distances to the following vehicles.
Caution
If the mirror housing has been shifted out of position as a result of external
force (e.g. striking an object when parking), the mirror must then be folded
in fully with the electric motor. On no account attempt to move the mirror
housing back by hand otherwise proper operation of the mirror mecha-
nism will be affected. This applies only to models fitted with the fold-in
function for both exterior mirrors*.

.
⇒ page 67, fig. 50
 and the reverse
Note
•
Do not touch the surface of the exterior mirrors if the exterior mirror
heater is switched on.
•
You can set the exterior mirrors by hand, if the power setting function
fails at any time, by pressing on the edge of the mirror surface.
•
Contact your Škoda dealer if a fault exists with the power setting of the
exterior mirrors.