Vaxcel T0294 Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION
T0294 / T0295
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
Important to Know
1. Read all instructions carefully before installation and
operation.
2. If you are not familiar with state and local electrical codes,
it is recommended that you consult with a qualified
electrician.
3. Before installation, shut off power at the main fuse or
circuit breaker box. Be aware that simply turning off the
wall switch is not sufficient to prevent an electrical shock.
4. This fixture requires a 120V AC, 60 Hz power source.
5. Do not attempt to take the lantern apart; there are no
serviceable parts inside.
6. To avoid sensor damage by lightning or electrical surge,
make sure the grounding wire is securely connected.
7. For general safety and to avoid any possible damage to
the sensor, be sure the power is switched "off" before
replacing the bulb.
Maximum Wattage: 60W Incandescent bulb
Work Temperature: -4ºF ~ 104ºF
Fixture
Ball Nut (G)
Rubber
pad (H)
Metal Frame
Set Screw
Type A Max. 60W Bulb
(not include)
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Headless Screws(D)
Back Plate
Fixture Wire
Wire Nut(E)
Page 1 / 4
Features
1. Energy saving fixture.
2. Use the dim-to-bright illumination option where
you want some minimum illumination through out
the night, such as at your front entrance or
garage door. Use the dark-to-bright illumination
option where you do not need minimum
brightness, such as the backyard or back porch.
3. When in manual override mode, use wall switch
to keep the light ON till dawn.
Hardware Package (included):
Mounting Screw (B)
Cross Bar (A)
Lock Nut (F)
Wire Nut (E)
Cross Bar(A)
Green Grounding Screw(C)
Fixture Grounding Wire
Green Grounding
Screw (C)
Rubber Pad (H)
Ball Nut (G)
Lock Nuts(F)
House Grounding Wire
Outlet Box
161107