Advertisement
Repositioning the driving belt
Severe jolts (during transport, for example) may cause the record player's driving
belt to slip off. To put it back into position, do as follows:
1. Remove the mains plug from the wall socket.
To achieve the best quality when playing or converting your records to digital
files you should observe the following information:
• Check the stylus regularly. You can brush off fluff and small bits of dirt with a
soft brush, brushing from the back to the front. For more stubborn dirt, add a
little cleaning spirit to the brush.
For information on how to change the stylus refer to "Changing the
stylus".
• Secure the tone arm and turntable when transporting the device.
• The adapter must always be used when playing singles.
• Check the connection to your hi-fi system before playing a record.
• Clean your records with an antistatic cloth before playing them.
2. Take the rubber mat off the turntable.
3. Turn the turntable to the position illustrated.
4. Pull the driving belt out slightly and place
it on the drive wheel as shown in the
illustration.
Playing records
UK - 5
Advertisement
