Advertisement
Unpacking
DANGER to children - danger to life due to suffocation/swallowing
• Keep the packing material out of the reach of children. Dispose of it
immediately.
• Remove the record player and rubber mat from the packaging and remove all
packing material.
Setting up and preparing the device
• Place the device on an even and stable surface.
• Remove the protective cap from the pick-up system by pulling it downwards.
If the turntable does not turn, check that the belt is correctly fitted around the
turntable rim (Underneath the turntable) and motor spindle.
To do this remove the rubber turntable mat and look through the lots on top of the
turntable and refit the belt if required.
Connecting the device
Audio connection
The record player has an inbuilt preamplifier and can therefore be connected
directly to the Line In / Aux input on a hi-fi system.
CAUTION - material damage
• Do not connect the device to the PHONO input of your hi-fi system.
Your receiver/amplifier could be damaged.
• Connect the audio cable to the Line In / Aux input on your hi-fi system (red
plug = right channel; white plug = left channel).
USB port
You will find information on connecting the record player to a PC in the section
"Converting records to digital files".
Mains connection
First-time use
• Turn the white transport braces on the turntable
until you can remove them. Store them carefully.
• Place the rubber mat on the turntable so that the
spindle on the turntable pokes through the openingin
the mat.
UK - 4
Advertisement
