Click On "Preview" To Check The Effect; Attention: Only Use Effect With Great Care, Otherwise; Parts Of The Recording Will Also Be Erased - Crosley L-79 Operating Instructions Manual

6. Click on "Remove clicks". The window closes and Audacity removes the clicks.

This may take several minutes, depending on the length of the recording.

Splitting a recording into separate tracks

If you wish to convert all the tracks on a record into digital files it is worth recording

each side of the record "in one piece" first and then splitting it into separate

tracks.

If there are still unwanted gaps before, in or after your recording you should

remove them before splitting the recording.

3. Then again mark with the cursor the whole recording that is to be edited, or

select "All" under "Select..." in the "Edit" menu.

You can split the recording manually or do it automatically.

3. Use the slider under "Select threshold" to set the

sensitivity of the filter.

4. Use the slide control under "Max. spike width" to

set the maximum length of the click that is to be

removed.

5. Click on "Preview" to check the effect.

with the click.

1. Click on the "Fit project in window" tool. The

whole recording is now shown in the editing

window.

2. Mark unwanted gaps, if applicable, with the

cursor and click on the "Cut" tool.

UK - 15

Table of Contents