Using Your Remote Transmitter; Two Stage Door Unlock (Optional); Activating The Trunk Release Feature (Optional); Turning On The Vehicle's Headlights (Optional) - Code Alarm CA-150 Owner's Manual

Table of Contents

Advertisement

Using Your Remote Transmitter

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the UNLOCK icon button one time on the transmitter
will unlock only the driver's door. Press the UNLOCK icon button again within 15 seconds to unlock
the remaining doors.

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the TRUNK icon button on the
transmitter for 2 seconds will open the vehicles trunk or hatch.

Turning on the Vehicle's Headlights (Optional)

If this feature is enabled on your system, pressing and holding the LOCK icon button on the transmitter
for 2 seconds will turn on the vehicle's headlights for 30 seconds.
Using the Progressive Car Finder Feature
*
Press the
icon button on the transmitter to locate your vehicle. The horn will honk 5 times at low
volume increasing in volume each of 3 times the button is pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the
alarm. The horn will pulse for 30 seconds. Pressing any button on the transmitter will turn the
personal protection alarm off.

Using the Transmitter Flashlight Feature

The 6 button transmitters included with your system have a flashlight bulb built into the top of the
transmitter. Pressing and holding the LIGHT icon button on the transmitter will activate the flashlight
until the button is released.

Using Valet Mode

To engage valet mode:
1.
Turn the ignition key to the ON position.
2.
Press and hold the valet/override button until the blue dash mounted status indicator
light turns on solid. Indicating that the system has entered valet mode.
When valet mode is activated the blue dash mounted status indicator light will light solid, and all
security functions will be disabled.
To disengage valet Mode:
1.
Turn the ignition key to the ON position.
2.
Press and release the valet/override button, the blue dash mounted status indicator
light will turn off. Indicating that the system has exited valet mode.
When the valet mode has been deactivated the blue dash mounted status indicator light will turn off
and all security functions will be enabled the next time the system is armed.
4
*
icon button on the transmitter for 3 seconds to activate the personal protection

Advertisement

Table of Contents
loading

Table of Contents