Installing The Software On A Mac Computer - Sierra Wireless U598 Manual

10.
If a message that you must restart your computer is displayed, click
computer. Wait until your computer restarts.
11.
Proceed to "Starting the Windows Software" on page 11.

Installing the Software on a Mac Computer

System Requirements
The ****** ****** ****** USB modem is supported on a MacBook™, MacBook Air™, MacBook
®
Pro, PowerBook G4, Power Mac
version 10.4 or newer.
To check your version, from the Apple menu (
earlier than 10.4, then you must upgrade to version 10.4 or newer; contact an Apple
reseller, an Apple retail store, or visit
To install and run the USB modem and accompanying ****** ****** software on a Mac
computer, you will need one USB slot.
Note Do not insert the USB modem or the USB extension cable into a USB hub or, if your keyboard is
separate from your laptop, a USB slot on your keyboard.
Installing the Software and Drivers
Note As part of the installation process you will be prompted to restart your computer; save any
open documents.
1.
If your USB modem has not yet been activated, ensure you are in the network
coverage area (not roaming).
2.
Remove the protective cap from the USB modem by placing your fingers on the sides
of the cap and carefully pulling it off.
®
G5, or desktop iMac computer running Mac OS X
) choose
www.apple.com/store
Section 2A. Installing the Software
Yes
. If your version is
About This Mac
.
to restart your
9