Stow 'N Go Seating - If Equipped; Power Ad Justment (Rear Seats) - If Equipped - Chrysler PACIFICA 2019 Quick Reference Manual

Linking And Unlinking The Remote Keyless Entry
Key Fob To Memory
Your key fob can be programmed to recall one of two
pre-programmed memory profiles by pushing the un-
lock button on the key fob.
To program your key fob, perform the following:
1. Cycle the vehicle's ignition to the OFF position.
2. Select a desired memory profile (1 or 2).
3. Once the profile has been recalled, push and re-
lease the set (S) button on the memory switch.
4. Push and release button (1) or (2) accordingly.
"Memory Profile Set" (1 or 2) will display in the
instrument cluster.
5. Push and release the lock button on the key fob
within ten seconds.
NOTE:
Your key fob can be unlinked to your memory settings
by pushing the set (S) button, and then, within ten
seconds, pushing the unlock button on the key fob.
For further information, and applicable warnings and
cautions, please refer to the Owner's Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
Stow 'n Go Seating — If
Equipped
On vehicles equipped with Stow 'n Go seating, the
second and third row seats can be folded into the floor
for convenient storage.
Auto Advance 'n Return — If Equipped
With the Auto Advance 'n Return feature, the front
seat will move forward with the push of a button. This
allows the front seat to move to a location that will not
interfere when the second row seat is stowed.
NOTE:
The Auto Advance 'n Return feature is available to
both the front driver and passenger power seats, if
equipped.
For further information, and applicable warnings and
cautions, please refer to the Owner's Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
Power Ad justment (Rear
Seats) — If Equipped
Third Row Power Recline
The power recline feature, located on the trim panel
next to the seat, adjusts the seatback angle
forward/rearward for occupant comfort.
Push and hold the forward or rearward button, the seat
will move in the direction of the button push. Release
the button when the desired position is reached.