Cancel Function; User Mode; Adjusting The Water Softener - Zanussi ZDV14002FA User Manual

CANCEL FUNCTION

Press and hold simultaneously
With this function you can cancel the running programme or the delay start.

USER MODE

While the appliance is in programme selection mode:
1. Press and hold
• The indicators
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The activation or the deactivation of the acoustic signal for end of programme.
These settings will be saved until you change them again.

ADJUSTING THE WATER SOFTENER

While the appliance is in user mode:
1. Press .
• The indicators
• The indicator
• The current setting is indicated by the number of flashes of the indicator
pause + 5 flashes = level 5).
2. Press to change the setting. Each time you press
10 you will start again from level by 1.
and until the appliance is in programme selection mode.
and .
, and starts to flash.
x5
and goes off.
starts to flash.
(e.g. 5 flashes +
, the level increases. After level
x6
7