CANCEL FUNCTION
Press and hold simultaneously
With this function you can cancel the running programme or the delay start.
USER MODE
While the appliance is in programme selection mode:
1. Press and hold
•
The indicators
In user mode can be changed:
•
The level of the water softener according to the water hardness.
•
The activation or the deactivation of the acoustic signal for end of programme.
•
The deactivation of the rinse aid dispenser when you want to use the Multitab option without the rinse
aid.
These settings will be saved until you change them again.
ADJUSTING THE WATER SOFTENER
While the appliance is in user mode:
1. Press
.
•
The indicators
•
The indicator
•
The current setting is indicated by the number of flashes of the indicator
pause + 5 flashes = level 5).
and
and
.
,
and
x5
and
goes off.
starts to flash.
until the appliance is in programme selection mode.
starts to flash.
x6
(e.g. 5 flashes +
7