Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL, GAS SKILLETS, MODELS GMTS-(30, 40, 60)
INSTALLATION INSTRUCTIONS (Continued)
ELECTRICAL CONNECTIONS
WARNING: Do not connect the appliance to the electrical supply
until after the gas connection has been made.
WARNING: ELECTRICAL GROUNDING INSTRUCTIONS
This appliance is equipped with a three-prong (grounding) plug for
your protection against shock hazard and should be plugged
directly into a properly grounded three-prong receptacle. Do not cut
or remove the grounding prong from this plug. (120V units only).
The wiring compartment is located behind the control panel. For units operated on electrical
supply other than 120 volts, remove the wiring compartment cover and make electrical
connections per the wiring diagram located inside the control housing cover panel. The
braising pan must be grounded in accordance with requirements of the National Electrical Code
or applicable local code.
Replace wiring compartment cover.
Part No. 10094R2
9
2019-01-16
Advertisement
Table of Contents
