Intelligent Dosing System; Starting The Program With The Intelligent Dosing System - Siemens WM14VK0CFG User Manual And Installation Instructions

NL Intelligent dosing system
In order not to cancel the program in
progress, the program selector must be
set to the output programme
to stand.
a goes out in the display
1

5 Intelligent dosing system

teem
a Depending on the program and the
settings, the optimum amounts of
liquid detergent and fabric softener
are dosed automatically.
15.1 Program with intelligent
dosing system
start
If you do not want to manually dose
liquid detergent and fabric softener,
use the intelligent dosing system. This
function is available depending on the
program set and is activated
automatically.
Remarks
s Take the information about the
subject security → Page 4 and
avoid material damage
→
Page 11 be aware of your appli-
to use safely.
40
.
s If you use the intelligent dosing system
tem, do not add additional
detergent or fabric softener to the
manual dosing dispenser.
→ "Detergent and laundry care
dosing agent", page 38
If you want to dose manually for
a set program, please observe
the following instructions:
– Deactivate the intelligent dosing
system before starting the
program. The settings are saved
even after the device is switched
off.
→ "Buttons", Page 23
→ "Buttons", Page 23
– Fill the detergent or fabric
softener into the manual dosing
dispenser.
→
"Detergent and laundry care
dosing medication",
Page 38
–
Activate the intelligent dosing
system after the program has
ended.
→ "Buttons", Page 23
→ "Buttons", Page 23
Requirements
s The laundry is prepared.
→ "Prepare laundry",
Page 34
s The laundry is sorted.
→ "Sorting the laundry", Page 34
s The laundry has been placed.
→ "Fill the drum with laundry",
Page 38
s The program is set.
→ "set program",
Page 37
s The intelligent dosing system is
activated.
→ "Buttons", Page 23
→ "Display", page 21
→ "Display", page 21