Table of Contents
Advertisement
NL Cleaning and maintenance
16.2 Changing basic settings
Set the program selector to
1.
position 1.
Press Centrifuge and at the same
2.
time turn the program selector to
position 2.
a The display shows the current value
the on.
Set the program selector to the
3.
desired position.
Press - / + to change the value.
4.
Turn off the device to save the
5.
change.
1
7 Cleaning and maintenance
loves
R
clean and maintain your appliance
carefully to ensure that it continues to
work properly for a long time.
17.1 Tips for maintaining
the appliance
The housing and This keeps the
operating parts
panel only clean and hygienic with
water and a nis.
damp cloth
to take.
44
Delete immediately
all detergent
residues, spray
skin residues or residues remaining
behind worter residues are removed.
aunts.
The door of the
device and the
detergent drawer
open after use
to leave.
17.2 Cleaning the drum
CAREFULLY
Risk of injury!
Permanent washing at low
temperatures and lack of ventilation
of the appliance can damage the
drum and cause injuries.
Regular program for
▶
clean the drum or wash at a
temperature of at least 60°C.
The appliance after every use
▶
leave an open door and detergent
drawer to dry.
The program Cleaning the drum
▶
without laundry with powder
detergent.
Recent deposit
gene can make
lighter and sun-
residual water can
then evaporate,
which the fragrance
formation in the
reduce device
third.
Advertisement
Table of Contents
