Cpos Interface Attributes - Huawei AR1200-S Series Hardware Description

Huawei AR1200-S&2200-S Series Enterprise Routers
Hardware Description
Attribute
Operating temperature

9.3 CPOS Interface Attributes

This section describes the CPOS interface attributes.
A CPOS optical interface can be connected to an optical module.
describe the attributes of optical interfaces and optical modules.
Table 9-6 CPOS interface attributes
Attribute
Connector type
Optical interface
attribute
Standards
compliance
Frame format
Network layer
protocol
Table 9-7 Attributes of the SFP optical module supported by the CPOS interface
Attribute
Transmissio
n distance
Center
wavelength
Transmittin
g power
Receiver
sensitivity
Overload
optical
power
Issue 03 (2012-04-20)
Description
Input 1480 nm to 1500 nm
wavelength
range
0°C to 70°C
Description
LC/PC
Depending on the SFP optical module
STM-1
SDH/SONET
IP
Description
2 km 15 km
1310 nm 1310 nm
-19.0 dBm to -15.0 dBm to 8.0
-14.0 dBm dBm
-28.0 dBm -23.0 dBm
-14.0 dBm -10.17 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 List of Interface Attributes
Table 9-6 and
40 km 80 km
1310 nm 1550 nm
-15.0 dBm to 8.0 -3.0 dBm to 0
dBm dBm
-23.0 dBm -32.98 dBm
-8.0 dBm -8.0 dBm
Table 9-7
155