Huawei AR1200-S Series Hardware Description page 67

Huawei AR1200-S&2200-S Series Enterprise Routers
Hardware Description
l
l
l
l
Applications
1CPOS-155M can be installed in a SIC slot of AR2220-S.
Panel and Interfaces
Figure 5-16
Figure 5-16 Appearance of the 1CPOS-155M
Buttons and Indicators on the Panel
Table 5-46
Table 5-46 Buttons and indicators on the 1CPOS-155M panel
Number in
Figure 5-16
1
Issue 03 (2012-04-20)
Supports four SFP optical module types: short-distance multi-mode (1310 nm), mid-
distance single-mode (1310 nm), long-distance single-mode (1310 nm), and ultra-long-
distance single-mode (1550 nm).
Automatically starts and loads configurations after being powered on, provides the system
management function using a GE inband channel, and uses the UART serial interface as
the escape channel for subcard.
Uses the 12 V power provided by the backplane, be powered on and off by the main control
board, and monitors voltage and current.
Be hot swappable.
shows the appearance of the 1CPOS-155M.
1
describes the buttons and indicators on the 1CPOS-155M panel.
Indicator
STAT
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 3
a
Color Description
Green If the indicator blinks once 2s (0.5
Hz), the system is running properly.
If the indicator blinks once 0.25s (4
Hz), the system is powering on or
restarting.
Red If the indicator is red, a fault that
affects services occurs and cannot be
rectified automatically. The fault
needs to be rectified manually.
5 Cards
60