Huawei AR1200-S Series Hardware Description page 71

Huawei AR1200-S&2200-S Series Enterprise Routers
Hardware Description
Buttons and Indicators on the Panel
Table 5-51
Table 5-51 Buttons and indicators on the 3G-HSPA+7 panel
Number
in
Figure
5-17
1
2
3
Issue 03 (2012-04-20)
describes the buttons and indicators on the 3G-HSPA+7 panel.
Indicator Color
STAT Green
Red
Orange
3G Green
2G Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
If the indicator is steady on, the router
has been powered on, but the system
software is not running.
If the indicator blinks once every 2s (0.5
Hz), the system is running properly.
If the indicator blinks once every 0.25s
(4 Hz), the system is loading software
after power-on or is restarting.
If the indicator is steady on, a fault that
affects services has occurred and
cannot be rectified automatically. The
fault needs to be rectified manually.
If the indicator is off, the software is not
running or is being reset.
If the indicator is steady on, the 3G
signal strength is high.
If the indicator blinks once every 2s (0.5
Hz), the 3G signals strength is low.
If the indicator blinks once every 0.25s
(4 Hz), the 3G signals strength is
medium.
If the indicator is steady on, the 2G
signal strength is high.
If the indicator blinks once every 2s (0.5
Hz), the 2G signals strength is low.
If the indicator blinks once every 0.25s
(4 Hz), the 2G signals strength is
medium.
5 Cards
64