Huawei AR1200-S Series Hardware Description page 44

Huawei AR1200-S&2200-S Series Enterprise Routers
Hardware Description
Table 5-12 Buttons and indicators on the 1GEC panel
Number
in
Figure
5-7
1
2 and 3
4 and 5
Interfaces
Table 5-13
Issue 03 (2012-04-20)
Indicator Color
STAT Green
Red
Off
GE interface Green
indicators:
l The LINK
indicator is in
green.
Yellow
l The ACT
indicator is in
yellow.
SFP interface Green
indicators:
l The LINK
indicator is in
green.
Yellow
l The ACT
indicator is in
yellow.
describes the types and functions of interface on the 1GEC.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
If the indicator blinks once 2s (0.5 Hz),
the system is running properly.
If the indicator blinks once 0.25s (4 Hz),
the system is powering on or restarting.
If the indicator is red, a fault that affects
services occurs and cannot be rectified
automatically. The fault needs to be
rectified manually.
If the indicator is off, the software is not
running or is being reset.
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
If the indicator is blinking, data is being
transmitted or received.
If the indicator is off, no data is being
transmitted or received.
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
If the indicator is blinking, data is being
transmitted or received.
If the indicator is off, no data is being
transmitted or received.
5 Cards
37