Satel SATELLINE-M3-R9 Integration Manual page 48

Retry Odds Uint8
Repeater Boolean
Frequency
Network ID Uint16
Slave/Repe Boolean
ater
TX Subnet Uint8
RX Subnet Uint8
Serial port
settings
0 - 9 0 - 9: Defines a
random base when
slave is trying to
resend data to
master if Max Slave
Retry count is
reached. Value 0
means that the
slave's data
buffer is purged
after Max Slave
Retry count is
reached
0 - 1 0: Disabled
1: Enabled
0 - 4095 0 - 4095: Network ID
for multipoint
networks.
Network ID 255 =
Call Book Mode
0: Disabled
1: Enabled
0 - 9, A - 0: Roaming
F 1 - E: Subnet ID
F: Disabled
0 - 9, A - 0: Roaming
F 1 - E: Subnet ID
F: Disabled
SL~E=M1,I18,A<Retry Odds>
<Retry Odds> = [0-9]
SL~E=M1,I19,A<Repeater Frequency>
<Repeater Frequency> = 0 (=Disabled) or 1
(=Enabled)
SL~E=M1,I20,A<Network ID>
<Network ID> = [0-4095]
Note: Network ID 255 = Call Book Mode
SL~E=M1,I21,A<Slave/Repeater>
<Slave/Repeater> = 0 (=Disabled) or 1 (=Enabled)
SL~E=M1,I22,A<TX Subnet>
<TX Subnet> = [0-9, A-F] as presented on the left
SL~E=M1,I23,A<RX Subnet>
<RX Subnet> = [0-9, A-F] as presented on the left
GET: SL%B?
SET: SL%B=
47
SATELLINE-M3-TR8 /-TR9 / -R9
Integration Guide, Version 2.2