Satel SATELLINE-M3-R9 Integration Manual page 42

ModemInfo SL%4="data"
ModemInfo SL%C?
ModemInfo SL%C="text
string"
ModemInfo SL%D?
ModemInfo SL%H?
ModemInfo SL%I?
ModemInfo SL%R?
ModemInfo SL%S?
ModemInfo SL%V?
OperationMode SL+S=x
RadioFreq SL!D?
RadioFreq SL!U?
RadioFreq SL!W?
RadioFreq SL!Y?
RadioFreq SL&+=nnnn
Set arbitrary data (max 25 characters)
in memory location 4
Get product number (or other
customer info)
Sets p/n (or other customer info) if it is
empty (command works only once).
P/n must be stored to eeprom with
command SL**> (Save settings).
Otherwise it will be lost when power is
turned off
Get product type
Get logic hardware version
Get Firmware FlashID
Get Regional Info
Get Serial Number
Get firmware revision information
Activate sleep mode. Value of n:
"1" Turn the modem into a state
where it will hold parts of the radio on,
wakeup will take <5ms
"5" Turns ON Power Save mode
(TR3/TR4 specific command)
"6" Turns OFF Power Save mode
(TR3/TR4 specific command)
Get lower limit of frequency band 1
Get upper limit of frequency band 1
Get lower limit of frequency band 2
Get upper limit of frequency band 2
Set active frequency nnnn channels
above center frequency.
Frequency = Center frequency +
nnnn*Channel spacing
Value of nnnn is [0...number of
channels/2]
41
SATELLINE-M3-TR8 /-TR9 / -R9
Integration Guide, Version 2.2
otherwise data and carriage
return
"OK" or "ERROR"
Depends on setup
"OK" or error message
Depends on model, for
example "SATELLINE-M3-
TR8"
Hardware info
Depends on model
Region code number, Status
of regional settings followed
by CR character.
Region code number
0=Default (=not set, or rest of
the world), 1=US.
Status of regional settings
0=Default(=undefined),
1=Valid, 2=Conflict
Example: "1,2" means Region
code US and the settings are
in conflict to FCC
Serial number of radio
modem
For example "V07.22.2.3.0.2"
"OK" or "ERROR"
"nnn.nnnnn MHz"
"nnn.nnnnn MHz"
"nnn.nnnnn MHz"
"nnn.nnnnn MHz"
"OK" or "ERROR"