Solving Problems With The Remote Control - Epson ELPDC05 User Manual

Solving Problems with the
Remote Control
Make sure you are within 23 feet (7 m) of the document camera,
and within range of the document camera's sensor (approximately
30° to the left or right and 15° above or below).
The remote control batteries may not be installed correctly or may
be low on power. Try changing the batteries as described on
page 13.
Dim the room lights and turn off any fluorescent lighting. Make
sure the document camera is not in direct sunlight. Strong
lighting, especially fluorescent lights, may affect the document
camera's infrared receivers.
Turn off any nearby equipment that emits infrared energy, such
as a radiant room heater.
If the button on the remote control does not return the
NORMAL
screen to the auto iris default setting, try pressing the
AUTO/MANUAL
button's indicator light is on, the document camera is locked in
manual mode and the remote control's
effect.
button on the document camera. When this
NORMAL
button has no
Solving Problems
47