Note: For more details of Site Survey, please refer to the Site Survey section.
4.3 Site Survey
Use this feature to scan nearby Access Point.
No
Select
Channel
SSID
BSSID
Encryption
Signal(dBm)
Refresh
Connect
Auction: If you select 5G as your default wireless network, you can not scan the Access Point which is
operated in 2.4G band.
4.4 AP Scan List (5G / 2.4G)
This feature can help you to select the Access Point Channel by scan nearby Access Point status.
Refresh
4.5 Wireless Security Settings
Wireless Security Settings section will guide you to the entire Security modes configuration: WEP,
WPA(TKIP), WPA2(AES), WPA2-Mixed, and Radius. WPA(TKIP), WPA2(AES), and WPA2-Mixed are all
under WPA pre-shared key section.
Numbers of Access Points have been found in the site survey.
Select the Access Point you would like to associate with via select the radio button.
Access Point is currently uses which channel.
Access Point is broadcast the SSID.
Access Point's wireless MAC address.
Access Point is currently uses which security type.
Signal strength from Access Point to your station.
Press Refresh to rescan nearby Access Point.
After you selected the radio button, press Connect to process the connection.
Press Refresh to scan again.
18