Installing Two Rrus - Huawei RRU3971 Installation Manual

Figure 7-6 Installing the RRU onto the main bracket
Step 5 Use an inner hexagon torque screwdriver to tighten the captive screw into the holes on the top
of the attachment plate and main bracket to 5 N·m (44.25 lbf·in.) so that the attachment plate
and main bracket are firmly secured, as shown in
Figure 7-7 Securing the captive screw into the connection hole
----End

7.2.2 Installing Two RRUs

This section describes the procedure and precautions for installing two RRUs on a pole.
Prerequisites
The hoist clamp on the main bracket is secured properly.
Issue () Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 7-7.
7 Installing the RRU
53