Hoisting Power Cables Onto A Tower - Huawei RRU3971 Installation Manual

Step 2 Secure the fiber optic cables to the tower vertically using cable clips.
Step 3 Remove the lifting sling, traction sling, and protection pipe.
----End

6.3 Hoisting Power Cables onto a Tower

This section describes the procedure for hoisting power cables onto a tower and the precautions
that must be taken.
Context
Cabling requirements for power cables are met. For details, see
The procedure for adding a connector to the RRU power cable on the RRU side is done under
the tower.
Procedure
Step 1 Hoist the power cables onto the tower, as shown in
Figure 6-9 Hoisting power cables onto the tower
(1) Lifting sling
Issue ()
NOTE
The procedure for hoisting the fiber optic cables onto the tower is for your reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Hoisting an RRU and Related Cables onto a Tower
8.1 Cabling
Figure 6-9.
(2) Fixed pulley
Requirements.
45