Installing An Rru Power Cable - Huawei RRU3971 Installation Manual

Figure 8-28 Installing a CPRI optical cable
To avoid any damage to optical cables, the cables connected to the RRU must be installed
according to the installation process. For details about the installation process, see
RRU
Step 3 Connect the end labeled 2A and 2B of the optical cable to the optical module on the BBU side.
Step 4 Route the cables according to the instructions in
ties to bind the cables.
Step 5 Label the installed cables according to the instructions in Attaching an L-Shaped Label.
----End

8.11 Installing an RRU Power Cable

This section describes the procedure for installing an RRU power cable.
Prerequisites
l
Issue ()
NOTICE
Cables.
A tool-less female connector (pressfit type) is added to the RRU power cable on the RRU
side. For details, see 11.1 Adding a Tool-Less Female Connector (Pressfit Type) to the
RRU Power Cable on the RRU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8.1 Cabling Requirements, and then use cable
Side.
8 Installing RRU Cables
8.3 Installing
112