Table of Contents
Advertisement
Optional AC Adapter Specifications
Physical Dimensions
Width
1.97 inches (50 mm)
Height
1.18 inches (30 mm)
1.85 inches (47 mm) including pins
Depth
3.74 inches (95 mm)
Technical
Output
DC 7V/2.0A
Input
110 to 120 V AC, 50 to 60 Hz
Box Contents
PhotoPC 600 camera
User's Guide
4AA NIMH rechargeable batteries and battery charger
Serial cable for PC
Macintosh serial cable adapter
Software on CD-ROM: Sierra
diskette creation utility, EPSON Photo!2 application and
TWAIN driver, EPSON Photo File Uploader, EPSON
Photo!2 Program Uploader
Minimum System Requirements
®
Windows
Processor
486 or higher
Operating
Windows 95, Windows 3.1
System
or later, Windows for
Workgroups 3.11 or later,
or Windows NT 3.5 or
later
RAM
16MB
serial port with standard
Ports
RS-232C interface
Display
640
480, 256 colors
®
Image Expert
with
™
®
Macintosh
68040 or higher or
Power PC
™
System Software
Version 7.1 or later
(System 7.5 or later
required to access
CompactFlash card
memory directly from
the Macintosh.)
16MB
standard Macintosh
modem/printer port
640
480, 256 colors
Windows
Hard drive
30MB
space
CD-ROM
double-speed
drive
Using Batteries
PhotoPC 600 comes with four rechargeable NiMH batteries
and a charger.
Charging Batteries
WARNING
Make sure you use the charger only with EPSON rechargeable NiMH
batteries (Model EU-24). To avoid the danger of leakage or explosion,
do not place any other batteries in the charger. Do not insert batteries
backwards. Do not open the cover while batteries are charging. For
indoor use only. Do not use within reach of children.
Follow these steps to charge your batteries:
1. Lift up the cover of the charger and insert all four batteries,
positioning the + and – ends as shown. Then close the cover
firmly.
2. Turn the charger over and flip the two prongs out of their
compartment.
8/97
EPSON PhotoPC 600
®
Macintosh
30MB
double-speed
EPSON PhotoPC 600
®
- 3
Advertisement
Table of Contents
