Technical Assistance - Nastec 4HS Installation And Operating Manual

13. Technical Assistance

For more technical information contact the authorized reseller providing the following informations. Easier and
faster will be the solution of the problem if full information will be provided.
4HS model
4HS - /
Line voltage: ___ [V]
Description of the problem:
Motor cable length [m]: _____
Pressure tank volume: _____ [liter]
Pressure sensor signal range (in accordance to the value reported on the sensor plate)
4 mA = ___ [bar]
20 mA = ___[bar]
Used input digital & uses
electric and hydraulic scheme of the (better if explained pipes length and diameter , check valves and ball valves
position, , pressure tank position, pressure sensor position, , main switches position, control boxes, etc.)
Set parameters: please fill in the software scheme with the set parameters and attach the scheme to the email or
send it to us by fax.
LCD version (shown when CM is power
supplied)
LCD = _.__
Line Frequency:
INV version (shown when CM is power
supplied)
INV = _.__
50 Hz 60 Hz
Motor cable section [mm2]:____
Precharge pressure : _____ [bar]
Used digital output and uses
31