Epson Perfection 640U Scanner Basics page 18

6. When you return to the Add New
Hardware Wizard, click
7. Windows finds the driver for your
scanner and you see this screen:
Click .
Next
8. After the scanner software installation is complete,
the Screen Calibration utility automatically starts.
For the best results from an EPSON ink jet
printer, leave the default setting of 1.8.
If you are using a different printer or your
printouts don't match what you see on screen,
you can change the setting. Move the slider to the
right or left until the shades of the horizontal gray
stripes appear similar. View the screen from a short
distance. The gray stripes will not perfectly blend
together; however, try to make the two tones
match as closely as possible.
9. Click to register the calibration setting.
OK
.
Next
Setting Up Your Scanner
13